Screen Printing Related machine
Description
Description
Manual clamp for mesh stretching machine
| Introduction: Shanghai SPRING manual clamp for mesh stretching machines is specially used to stretch screen in screen-printing, several clamps connected together. This manual clamps is small and exquisite, simple operation, can stretch the mesh with size 2*3M. |
 |
Stretching Description:
1, Clamp tightly one end of the mesh (length way) in even, then leveled clamping on both sides, and then the remaining part folded clamping. In order to ensure the quality of stretch, the mesh surface must plain and no wrinkles when you clamp the mesh, one by one close to the clampers make sure no gap. 2. When the mesh is clamped, rotated the hand wheel in the middle of the pallet in lockwise. At this time, the handwheel (screw) drives the worm wheel, the gear, the rack drive, moves outward, tighten the mesh. Turn the handwheel counterclockwise to loosen the mesh. When stretching the four sides can be pulled at the same time, also can be stretched one by one, the length of the elongation ratio due to the different sides should be stretched a little longer than wider two sides.
3. Once the stretching tension to achieve the requirement, turn the drive disk counterclockwise, then the entire pallet raised parallel to the net frame close to the mesh, can be coated with mesh paste. Turn the drive disc clockwise, the entire pallet down, mesh frame leave the mesh.
Features of the manual clamps streching:
- Easy to store and transport.
- Net yarn on the aluminum frame to equilibrium.
- For silk screen tension average, firmness any adjustment.
- Net frame, easy to use, and korah infinite.
- Net frame, there is no limit to the size, if you need to pull a larger net frame, can be in proportion to increase net clamp.
Details of the pneumatic mechanical screen frame stretch clamps:
- Cylinder: 40*75mm
- Chuck length: 300mm
- Pedestal length: 450mm
- Clamping thickness: 16mm
- Stretch area: Freely combined
- Weight: 5kg/pcs
- Package: in carton
- Tension: 20N more or less
- Special size can be customized, such as 50*100mm cylinder, chuck length 30mm, Tension: 25N more or less, etc.
Send your message to us
